模組:Protection banner/sandbox
![]() | 这是Module:Protection banner(差异)的沙盒。 |
![]() | 此模块sandbox被引用於約3,400個頁面。 為了避免造成大規模的影響,所有對此模块sandbox的編輯應先於沙盒或測試樣例上測試。 測試後無誤的版本可以一次性地加入此模块sandbox中,但是修改前請務必於討論頁發起討論。 模板引用數量會自動更新。 |
![]() | 此模块sandbox已被保护。此为高度可见模块sandbox,其已用于大量条目或被频繁替换引用。由于破坏或失误会影响诸多页面,即便细小的改动也可能导致大量服务器负载,因此已被保护,不可编辑。 |
This module creates protection banners and padlock icons that are placed at the top of protected pages.
Usage
Most users will not need to use this module directly. For adding protection templates to pages you can use the {{pp}} template, or you may find it more convenient to use one of the more specific protection templates in the table below.
![]() |
{{pp-meta}}
|
全保护 | 延伸確認保護 | 半保护 | 移动保护 |
---|---|---|---|---|---|
争议: | {{pp-dispute}} |
{{pp-move-dispute}}
| |||
破坏: | {{pp-vandalism}} |
{{pp-move-vandalism}}
| |||
高风险模板: | {{pp-template}} |
不適用 | {{pp-template}} |
不適用 | |
高风险模块: | {{pp-module}} |
不適用 | {{pp-module}} |
不適用 | |
用戶討論頁: | {{pp-usertalk}} |
不適用 | {{pp-semi-usertalk}} |
不適用 | |
傀儡: | 不適用 | {{pp-ecp-sock}} |
{{pp-semi-sock}} |
不適用 | |
生者傳記: | 不適用 | 不適用 | {{pp-semi-blp}} |
不適用 | |
长期: | 不適用 | 不適用 | {{pp-semi-indef}} |
{{pp-move-indef}}
| |
通用: | {{pp}} |
{{pp-move}}
| |||
基金会行動: | {{pp-office}} |
不適用 | {{pp-reset}} |
不適用 | |
讨论页信息: | {{Permanently protected}} |
不適用 | {{Temporarily protected}} |
不適用 | |
白纸保护: | {{pp-create}} |
不適用 |
From wikitext
{{#invoke:Protection banner|main | 1 = reason | small = yes/no | action = action | date = protection date | user = username | section = talk page section name | category = no }}
The #invoke syntax can be used for creating protection templates more specific than {{pp}}. For example, it is possible to create a protection template which always shows a padlock icon by using the code {{#invoke:Protection banner|main|small=yes}}
. Pages which call this template will still be able to use other arguments, like action. However, this only works one level deep; a page calling a template which calls another template containing the above code will not automatically be able to use parameters like action.
Note: You should no longer specify the expiry, as it is automatically retrieved in all cases.
From Lua
First, load the module.
local mProtectionBanner = require('Module:Protection banner')
Then you can make protection banners by using the _main function.
mProtectionBanner._main(args, cfg, titleObj)
args is a table of arguments to pass to the module. For possible keys and values for this table, see the parameters section. The cfg and titleObj variables are intended only for testing; cfg specifies a customised config table to use instead of Module:Protection banner/config, and titleObj specifies a mw.title object to use instead of the current title. args, cfg and titleObj are all optional.
Parameters
All parameters are optional.
- 1 - the reason that the page was protected. If set, this must be one of the values listed in the reasons table.
- small - if set to "yes", "y", "1", or "true", a padlock icon is generated instead of a full protection banner.
- action - the protection action. Must be one of "edit" (for normal protection), "move" (for move-protection) or "autoreview" (for pending changes). The default value is "edit".
- date - the protection date. This must be valid input to the second parameter of the #time parser function. This argument has an effect for reasons that use the PROTECTIONDATE parameter in their configuration. As of July 2014, those were the "office" and "reset" reasons.
- user - the username of the user to generate links for. As of July 2014, this only has an effect when the "usertalk" reason is specified.
- section - the section name of the protected page's talk page where discussion is taking place. This works for most, but not all, values of reason.
- category - categories are suppressed if this is set to "no", "n", "0", or "false".
Reasons
The following table contains the available reasons, plus the actions for which they are available.
原因 | 操作 | 描述 |
---|---|---|
blp | edit | 为了遵守 生者傳記方针而保护的页面 |
dispute | edit | 由于编辑争议而被保护的页面 |
dmca | edit | 因數字千年版權法移除通知而被维基媒体基金会保护的页面 |
mainpage | edit | 由于在Wikipedia:首页展示而被保护的页面 |
office | edit | 被维基媒体基金会保护的页面 |
reset | edit | 被维基媒体基金会保护,并将其“重置”为纯粹版本的页面 |
sock | edit | 由于滥用傀儡而被保护的页面。 |
template | edit | 高風險模板和Lua模块 |
usertalk | edit | 由于特定用户破坏而被保护的页面 |
vandalism | edit | 由于破坏而被保护的页面 |
dispute | move | 由于标题争议而被移动保护的页面 |
vandalism | move | 由于移动破坏而被保护的页面 |
Errors
Below is a list of some of the common errors that this module can produce, and how to fix them.
Invalid protection date
Error: invalid protection date ("abc")
This error is produced if you supply an |date=
parameter value that is not recognised as a valid date by the #time parser function. If in doubt, you can just use a date in the format "dd Month YYYY", e.g. "26 8月 2024". To see a full range of valid inputs, see the #time documentation (only the first parameter, the format string, may be specified).
Invalid action
Error: invalid action ("abc")
This error is produced if you specify an invalid protection action. There are only three valid actions: edit
(the default, for normal protection), move
(for move-protection), and autoreview
(for pending changes). This should only be possible if you are using a template that supports manually specifying the protection action, such as {{pp}}, or if you are using #invoke directly. If this is not the case, please leave a message on Module talk:Protection banner.
Reasons cannot contain the pipe character
Error: reasons cannot contain the pipe character ("|")
This error is produced if you specify a reason using the |1=
parameter that includes a pipe character ("|"). Please check that you are not entering the {{!}} template into this parameter by mistake. The pipe character is disallowed as the module uses it internally. A list of valid reasons can be seen in the reasons section.
Other errors
If you see an error other than the ones above, it is likely to either be a bug in the module or mistake in the configuration. Please post a message about it at Module talk:Protection banner.
Technical details
This module uses configuration data from Module:Protection banner/config. Most of the module's behaviour can be configured there, making it easily portable across different wikis and different languages.
General test cases for the module can be found at Module:Protection banner/testcases, and test cases specific to enwiki's config can be found at Module:Protection banner/config/testcases.
Bug reports and feature requests should be made on the module's talk page.
上述文档嵌入自Module:Protection banner/doc。 (编辑 | 历史) 编者可以在本模块的沙盒 (编辑 | 差异)和测试样例 (创建)页面进行实验。 请在/doc子页面中添加分类。本模块的子页面。 |
-- This module implements {{pp-meta}} and its daughter templates such as
-- {{pp-dispute}}, {{pp-vandalism}} and {{pp-sock}}.
-- Initialise necessary modules.
require('strict')
local makeFileLink = require('Module:File link')._main
local effectiveProtectionLevel = require('Module:Effective protection level')._main
local effectiveProtectionExpiry = require('Module:Effective protection expiry')._main
local yesno = require('Module:Yesno')
-- Lazily initialise modules and objects we don't always need.
local getArgs, makeMessageBox, lang
-- Set constants.
local CONFIG_MODULE = 'Module:Protection banner/config'
--------------------------------------------------------------------------------
-- Helper functions
--------------------------------------------------------------------------------
local function makeCategoryLink(cat, sort)
if cat then
return string.format(
'[[%s:%s|%s]]',
mw.site.namespaces[14].name,
cat,
sort
)
end
end
-- Validation function for the expiry and the protection date
local function validateDate(dateString, dateType)
if not lang then
lang = mw.language.getContentLanguage()
end
local success, result = pcall(lang.formatDate, lang, 'U', dateString)
if success then
result = tonumber(result)
if result then
return result
end
end
error(string.format(
'%s「%s」並非有效的格式!',
dateType,
tostring(dateString)
), 4)
end
local function makeFullUrl(page, query, display)
return require('Module:Fullurl')._fullurl2(page, query, display)
end
-- Given a directed graph formatted as node -> table of direct successors,
-- get a table of all nodes reachable from a given node (though always
-- including the given node).
local function getReachableNodes(graph, start)
local toWalk, retval = {[start] = true}, {}
while true do
-- Can't use pairs() since we're adding and removing things as we're iterating
local k = next(toWalk) -- This always gets the "first" key
if k == nil then
return retval
end
toWalk[k] = nil
retval[k] = true
for _,v in ipairs(graph[k]) do
if not retval[v] then
toWalk[v] = true
end
end
end
end
--------------------------------------------------------------------------------
-- Protection class
--------------------------------------------------------------------------------
local Protection = {}
Protection.__index = Protection
Protection.supportedActions = {
edit = true,
move = true,
autoreview = true,
upload = true
}
Protection.bannerConfigFields = {
'text',
'explanation',
'tooltip',
'alt',
'link',
'image'
}
function Protection.new(args, cfg, title)
local obj = {}
obj._cfg = cfg
obj.title = title or mw.title.getCurrentTitle()
-- Set action
if not args.action then
obj.action = 'edit'
elseif Protection.supportedActions[args.action] then
obj.action = args.action
else
error(string.format(
'未知動作「%s」',
tostring(args.action)
), 3)
end
-- Set level
obj.level = args.demolevel or effectiveProtectionLevel(obj.action, obj.title)
if not obj.level or (obj.action == 'move' and obj.level == 'autoconfirmed') then
-- Users need to be autoconfirmed to move pages anyway, so treat
-- semi-move-protected pages as unprotected.
obj.level = '*'
end
-- Set expiry
local effectiveExpiry = effectiveProtectionExpiry(obj.action, obj.title)
if effectiveExpiry == 'infinity' then
obj.expiry = 'indef'
elseif effectiveExpiry ~= 'unknown' then
obj.expiry = validateDate(effectiveExpiry, '截止時間')
end
-- Set reason
if args[1] then
obj.reason = mw.ustring.lower(args[1])
if obj.reason:find('|') then
error('理由中不得存在「|」!', 3)
end
end
-- Set protection date
if args.date then
obj.protectionDate = validateDate(args.date, '保護日期')
end
-- Set banner config
do
obj.bannerConfig = {}
local configTables = {}
if cfg.banners[obj.action] then
configTables[#configTables + 1] = cfg.banners[obj.action][obj.reason]
end
if cfg.defaultBanners[obj.action] then
configTables[#configTables + 1] = cfg.defaultBanners[obj.action][obj.level]
configTables[#configTables + 1] = cfg.defaultBanners[obj.action].default
end
configTables[#configTables + 1] = cfg.masterBanner
for i, field in ipairs(Protection.bannerConfigFields) do
for j, t in ipairs(configTables) do
if t[field] then
obj.bannerConfig[field] = t[field]
break
end
end
end
end
return setmetatable(obj, Protection)
end
function Protection:isProtected()
return self.level ~= '*'
end
function Protection:isTemporary()
return type(self.expiry) == 'number'
end
function Protection:makeProtectionCategory()
local cfg = self._cfg
local title = self.title
-- Exit if the page is not protected.
if not self:isProtected() then
return ''
end
-- Get the expiry key fragment.
local expiryFragment
if self.expiry == 'indef' then
expiryFragment = self.expiry
elseif type(self.expiry) == 'number' then
expiryFragment = 'temp'
end
-- Get the namespace key fragment.
local namespaceFragment = cfg.categoryNamespaceKeys[title.namespace]
if not namespaceFragment and title.namespace % 2 == 1 then
namespaceFragment = 'talk'
end
-- Define the order that key fragments are tested in. This is done with an
-- array of tables containing the value to be tested, along with its
-- position in the cfg.protectionCategories table.
local order = {
{val = expiryFragment, keypos = 1},
{val = namespaceFragment, keypos = 2},
{val = self.reason, keypos = 3},
{val = self.level, keypos = 4},
{val = self.action, keypos = 5}
}
--[[
-- The old protection templates used an ad-hoc protection category system,
-- with some templates prioritising namespaces in their categories, and
-- others prioritising the protection reason. To emulate this in this module
-- we use the config table cfg.reasonsWithNamespacePriority to set the
-- reasons for which namespaces have priority over protection reason.
-- If we are dealing with one of those reasons, move the namespace table to
-- the end of the order table, i.e. give it highest priority. If not, the
-- reason should have highest priority, so move that to the end of the table
-- instead.
--]]
table.insert(order, table.remove(order, self.reason and cfg.reasonsWithNamespacePriority[self.reason] and 2 or 3))
--[[
-- Define the attempt order. Inactive subtables (subtables with nil "value"
-- fields) are moved to the end, where they will later be given the key
-- "all". This is to cut down on the number of table lookups in
-- cfg.protectionCategories, which grows exponentially with the number of
-- non-nil keys. We keep track of the number of active subtables with the
-- noActive parameter.
--]]
local noActive, attemptOrder
do
local active, inactive = {}, {}
for i, t in ipairs(order) do
if t.val then
active[#active + 1] = t
else
inactive[#inactive + 1] = t
end
end
noActive = #active
attemptOrder = active
for i, t in ipairs(inactive) do
attemptOrder[#attemptOrder + 1] = t
end
end
--[[
-- Check increasingly generic key combinations until we find a match. If a
-- specific category exists for the combination of key fragments we are
-- given, that match will be found first. If not, we keep trying different
-- key fragment combinations until we match using the key
-- "all-all-all-all-all".
--
-- To generate the keys, we index the key subtables using a binary matrix
-- with indexes i and j. j is only calculated up to the number of active
-- subtables. For example, if there were three active subtables, the matrix
-- would look like this, with 0 corresponding to the key fragment "all", and
-- 1 corresponding to other key fragments.
--
-- j 1 2 3
-- i
-- 1 1 1 1
-- 2 0 1 1
-- 3 1 0 1
-- 4 0 0 1
-- 5 1 1 0
-- 6 0 1 0
-- 7 1 0 0
-- 8 0 0 0
--
-- Values of j higher than the number of active subtables are set
-- to the string "all".
--
-- A key for cfg.protectionCategories is constructed for each value of i.
-- The position of the value in the key is determined by the keypos field in
-- each subtable.
--]]
local cats = cfg.protectionCategories
for i = 1, 2^noActive do
local key = {}
for j, t in ipairs(attemptOrder) do
if j > noActive then
key[t.keypos] = 'all'
else
local quotient = i / 2 ^ (j - 1)
quotient = math.ceil(quotient)
if quotient % 2 == 1 then
key[t.keypos] = t.val
else
key[t.keypos] = 'all'
end
end
end
key = table.concat(key, '|')
local attempt = cats[key]
if attempt then
return makeCategoryLink(attempt, title.text)
end
end
return ''
end
function Protection:isIncorrect()
local expiry = self.expiry
return not self:isProtected()
or type(expiry) == 'number' and expiry < os.time()
end
function Protection:isTemplateProtectedNonTemplate()
local action, namespace = self.action, self.title.namespace
return self.level == 'templateeditor'
and (
(action ~= 'edit' and action ~= 'move')
or (namespace ~= 10 and namespace ~= 828)
)
end
function Protection:makeCategoryLinks()
local msg = self._cfg.msg
local ret = { self:makeProtectionCategory() }
if self:isIncorrect() then
ret[#ret + 1] = makeCategoryLink(
msg['tracking-category-incorrect'],
self.title.text
)
end
if self:isTemplateProtectedNonTemplate() then
ret[#ret + 1] = makeCategoryLink(
msg['tracking-category-template'],
self.title.text
)
end
return table.concat(ret)
end
--------------------------------------------------------------------------------
-- Blurb class
--------------------------------------------------------------------------------
local Blurb = {}
Blurb.__index = Blurb
Blurb.bannerTextFields = {
text = true,
explanation = true,
tooltip = true,
alt = true,
link = true
}
function Blurb.new(protectionObj, args, cfg)
return setmetatable({
_cfg = cfg,
_protectionObj = protectionObj,
_args = args
}, Blurb)
end
-- Private methods --
function Blurb:_formatDate(num)
-- Formats a Unix timestamp into dd Month, YYYY format.
lang = lang or mw.language.getContentLanguage()
local success, date = pcall(
lang.formatDate,
lang,
self._cfg.msg['expiry-date-format'] or 'j F Y',
'@' .. tostring(num)
)
if success then
return date
end
end
function Blurb:_getExpandedMessage(msgKey)
return self:_substituteParameters(self._cfg.msg[msgKey])
end
function Blurb:_substituteParameters(msg)
if not self._params then
local parameterFuncs = {}
parameterFuncs.CURRENTVERSION = self._makeCurrentVersionParameter
parameterFuncs.EDITREQUEST = self._makeEditRequestParameter
parameterFuncs.EXPIRY = self._makeExpiryParameter
parameterFuncs.EXPLANATIONBLURB = self._makeExplanationBlurbParameter
parameterFuncs.IMAGELINK = self._makeImageLinkParameter
parameterFuncs.INTROBLURB = self._makeIntroBlurbParameter
parameterFuncs.INTROFRAGMENT = self._makeIntroFragmentParameter
parameterFuncs.PAGETYPE = self._makePagetypeParameter
parameterFuncs.PROTECTIONBLURB = self._makeProtectionBlurbParameter
parameterFuncs.PROTECTIONDATE = self._makeProtectionDateParameter
parameterFuncs.PROTECTIONLEVEL = self._makeProtectionLevelParameter
parameterFuncs.PROTECTIONLOG = self._makeProtectionLogParameter
parameterFuncs.TALKPAGE = self._makeTalkPageParameter
parameterFuncs.TOOLTIPBLURB = self._makeTooltipBlurbParameter
parameterFuncs.TOOLTIPFRAGMENT = self._makeTooltipFragmentParameter
parameterFuncs.VANDAL = self._makeVandalTemplateParameter
self._params = setmetatable({}, {
__index = function (t, k)
local param
if parameterFuncs[k] then
param = parameterFuncs[k](self)
end
param = param or ''
t[k] = param
return param
end
})
end
msg = msg:gsub('${(%u+)}', self._params)
return msg
end
function Blurb:_makeCurrentVersionParameter()
-- A link to the page history or the move log, depending on the kind of
-- protection.
local pagename = self._protectionObj.title.prefixedText
if self._protectionObj.action == 'move' then
-- We need the move log link.
return makeFullUrl(
'Special:Log',
{type = 'move', page = pagename},
self:_getExpandedMessage('current-version-move-display')
)
else
-- We need the history link.
return makeFullUrl(
pagename,
{action = 'history'},
self:_getExpandedMessage('current-version-edit-display')
)
end
end
function Blurb:_makeEditRequestParameter()
local mEditRequest = require('Module:Submit an edit request')
local action = self._protectionObj.action
local level = self._protectionObj.level
-- Get the edit request type.
local requestType
if action == 'edit' then
if level == 'autoconfirmed' then
requestType = 'semi'
elseif level == 'extendedconfirmed' then
requestType = 'extended'
elseif level == 'templateeditor' then
requestType = 'template'
end
end
requestType = requestType or 'full'
-- Get the display value.
local display = self:_getExpandedMessage('edit-request-display')
return mEditRequest._link{type = requestType, display = display}
end
function Blurb:_makeExpiryParameter()
local expiry = self._protectionObj.expiry
if type(expiry) == 'number' then
return self:_formatDate(expiry)
else
return expiry
end
end
function Blurb:_makeExplanationBlurbParameter()
-- Cover special cases first.
if self._protectionObj.title.namespace == 8 then
-- MediaWiki namespace
return self:_getExpandedMessage('explanation-blurb-nounprotect')
end
-- Get explanation blurb table keys
local action = self._protectionObj.action
local level = self._protectionObj.level
local talkKey = self._protectionObj.title.isTalkPage and 'talk' or 'subject'
-- Find the message in the explanation blurb table and substitute any
-- parameters.
local explanations = self._cfg.explanationBlurbs
local msg
if explanations[action][level] and explanations[action][level][talkKey] then
msg = explanations[action][level][talkKey]
elseif explanations[action][level] and explanations[action][level].default then
msg = explanations[action][level].default
elseif explanations[action].default and explanations[action].default[talkKey] then
msg = explanations[action].default[talkKey]
elseif explanations[action].default and explanations[action].default.default then
msg = explanations[action].default.default
else
istalk = talkKey == 'talk' and true or false
error(string.format(
'找不到 action=%s protectionlevel=%s istalkpage=%s 時的解釋說明',
action,
level,
istalk
), 8)
end
return self:_substituteParameters(msg)
end
function Blurb:_makeImageLinkParameter()
local imageLinks = self._cfg.imageLinks
local action = self._protectionObj.action
local level = self._protectionObj.level
local msg
if imageLinks[action][level] then
msg = imageLinks[action][level]
elseif imageLinks[action].default then
msg = imageLinks[action].default
else
msg = imageLinks.edit.default
end
return self:_substituteParameters(msg)
end
function Blurb:_makeIntroBlurbParameter()
if self._protectionObj:isTemporary() then
return self:_getExpandedMessage('intro-blurb-expiry')
else
return self:_getExpandedMessage('intro-blurb-noexpiry')
end
end
function Blurb:_makeIntroFragmentParameter()
if self._protectionObj:isTemporary() then
return self:_getExpandedMessage('intro-fragment-expiry')
else
return self:_getExpandedMessage('intro-fragment-noexpiry')
end
end
function Blurb:_makePagetypeParameter()
local pagetypes = self._cfg.pagetypes
return pagetypes[self._protectionObj.title.namespace]
or pagetypes.default
or error('「pagetypes.default」丟失!', 8)
end
function Blurb:_makeProtectionBlurbParameter()
local protectionBlurbs = self._cfg.protectionBlurbs
local action = self._protectionObj.action
local level = self._protectionObj.level
local msg
if protectionBlurbs[action][level] then
msg = protectionBlurbs[action][level]
elseif protectionBlurbs[action].default then
msg = protectionBlurbs[action].default
elseif protectionBlurbs.edit.default then
msg = protectionBlurbs.edit.default
else
error('沒有為「protectionBlurbs.edit.default」定義保護說明!', 8)
end
return self:_substituteParameters(msg)
end
function Blurb:_makeProtectionDateParameter()
local protectionDate = self._protectionObj.protectionDate
if type(protectionDate) == 'number' then
return self:_formatDate(protectionDate)
else
return protectionDate
end
end
function Blurb:_makeProtectionLevelParameter()
local protectionLevels = self._cfg.protectionLevels
local action = self._protectionObj.action
local level = self._protectionObj.level
local msg
if protectionLevels[action][level] then
msg = protectionLevels[action][level]
elseif protectionLevels[action].default then
msg = protectionLevels[action].default
elseif protectionLevels.edit.default then
msg = protectionLevels.edit.default
else
error('沒有為「protectionLevels.edit.default」定義保護級別!', 8)
end
return self:_substituteParameters(msg)
end
function Blurb:_makeProtectionLogParameter()
local pagename = self._protectionObj.title.prefixedText
if self._protectionObj.action == 'autoreview' then
-- We need the pending changes log.
return makeFullUrl(
'Special:Log',
{type = 'stable', page = pagename},
self:_getExpandedMessage('pc-log-display')
)
else
-- We need the protection log.
return makeFullUrl(
'Special:Log',
{type = 'protect', page = pagename},
self:_getExpandedMessage('protection-log-display')
)
end
end
function Blurb:_makeTalkPageParameter()
return string.format(
'[[%s:%s#%s|%s]]',
mw.site.namespaces[self._protectionObj.title.namespace].talk.name,
self._protectionObj.title.text,
self._args.section or 'top',
self:_getExpandedMessage('talk-page-link-display')
)
end
function Blurb:_makeTooltipBlurbParameter()
if self._protectionObj:isTemporary() then
return self:_getExpandedMessage('tooltip-blurb-expiry')
else
return self:_getExpandedMessage('tooltip-blurb-noexpiry')
end
end
function Blurb:_makeTooltipFragmentParameter()
if self._protectionObj:isTemporary() then
return self:_getExpandedMessage('tooltip-fragment-expiry')
else
return self:_getExpandedMessage('tooltip-fragment-noexpiry')
end
end
function Blurb:_makeVandalTemplateParameter()
return require('Module:Vandal-m')._main{
self._args.user or self._protectionObj.title.baseText
}
end
-- Public methods --
function Blurb:makeBannerText(key)
-- Validate input.
if not key or not Blurb.bannerTextFields[key] then
error(string.format(
'「%s」不是有效的橫幅配置金鑰。',
tostring(key)
), 2)
end
-- Generate the text.
local msg = self._protectionObj.bannerConfig[key]
if type(msg) == 'string' then
return self:_substituteParameters(msg)
elseif type(msg) == 'function' then
msg = msg(self._protectionObj, self._args)
if type(msg) ~= 'string' then
error(string.format(
'解析橫幅配置時生成錯誤「%s」',
tostring(key),
type(msg)
), 4)
end
return self:_substituteParameters(msg)
end
end
--------------------------------------------------------------------------------
-- BannerTemplate class
--------------------------------------------------------------------------------
local BannerTemplate = {}
BannerTemplate.__index = BannerTemplate
function BannerTemplate.new(protectionObj, cfg)
local obj = {}
obj._cfg = cfg
-- Set the image filename.
local imageFilename = protectionObj.bannerConfig.image
if imageFilename then
obj._imageFilename = imageFilename
else
-- If an image filename isn't specified explicitly in the banner config,
-- generate it from the protection status and the namespace.
local action = protectionObj.action
local level = protectionObj.level
local namespace = protectionObj.title.namespace
local reason = protectionObj.reason
-- Deal with special cases first.
if (
namespace == 10
or namespace == 828
or reason and obj._cfg.indefImageReasons[reason]
)
and action == 'edit'
and level == 'sysop'
and not protectionObj:isTemporary()
then
-- Fully protected modules and templates get the special red "indef"
-- padlock.
obj._imageFilename = obj._cfg.msg['image-filename-indef']
else
-- Deal with regular protection types.
local images = obj._cfg.images
if images[action] then
if images[action][level] then
obj._imageFilename = images[action][level]
elseif images[action].default then
obj._imageFilename = images[action].default
end
end
end
end
return setmetatable(obj, BannerTemplate)
end
function BannerTemplate:renderImage()
local filename = self._imageFilename
or self._cfg.msg['image-filename-default']
or 'Transparent.gif'
return makeFileLink{
file = filename,
size = (self.imageWidth or 20) .. 'px',
alt = self._imageAlt,
link = self._imageLink,
caption = self.imageCaption
}
end
--------------------------------------------------------------------------------
-- Banner class
--------------------------------------------------------------------------------
local Banner = setmetatable({}, BannerTemplate)
Banner.__index = Banner
function Banner.new(protectionObj, blurbObj, cfg)
local obj = BannerTemplate.new(protectionObj, cfg) -- This doesn't need the blurb.
obj.imageWidth = 40
obj.imageCaption = blurbObj:makeBannerText('alt') -- Large banners use the alt text for the tooltip.
obj._reasonText = blurbObj:makeBannerText('text')
obj._explanationText = blurbObj:makeBannerText('explanation')
obj._page = protectionObj.title.prefixedText -- Only makes a difference in testing.
return setmetatable(obj, Banner)
end
function Banner:__tostring()
-- Renders the banner.
makeMessageBox = makeMessageBox or require('Module:Message box').main
local reasonText = self._reasonText or error('沒有理由!', 2)
local explanationText = self._explanationText
local mbargs = {
page = self._page,
type = 'protection',
image = self:renderImage(),
text = string.format(
"'''%s'''%s",
reasonText,
explanationText and '<br />' .. explanationText or ''
)
}
return makeMessageBox('mbox', mbargs)
end
--------------------------------------------------------------------------------
-- Padlock class
--------------------------------------------------------------------------------
local Padlock = setmetatable({}, BannerTemplate)
Padlock.__index = Padlock
function Padlock.new(protectionObj, blurbObj, cfg)
local obj = BannerTemplate.new(protectionObj, cfg) -- This doesn't need the blurb.
obj.imageWidth = 20
obj.imageCaption = blurbObj:makeBannerText('tooltip')
obj._imageAlt = blurbObj:makeBannerText('alt')
obj._imageLink = blurbObj:makeBannerText('link')
obj._indicatorName = cfg.padlockIndicatorNames[protectionObj.action]
or cfg.padlockIndicatorNames.default
or 'pp-default'
return setmetatable(obj, Padlock)
end
function Padlock:__tostring()
local frame = mw.getCurrentFrame()
-- The nowiki tag helps prevent whitespace at the top of articles.
return frame:extensionTag{name = 'nowiki'} .. frame:extensionTag{
name = 'indicator',
args = {name = self._indicatorName},
content = self:renderImage()
}
end
--------------------------------------------------------------------------------
-- Exports
--------------------------------------------------------------------------------
local p = {}
function p._exportClasses()
-- This is used for testing purposes.
return {
Protection = Protection,
Blurb = Blurb,
BannerTemplate = BannerTemplate,
Banner = Banner,
Padlock = Padlock,
}
end
function p._main(args, cfg, title)
args = args or {}
cfg = cfg or require(CONFIG_MODULE)
local protectionObj = Protection.new(args, cfg, title)
local ret = {}
-- If a page's edit protection is equally or more restrictive than its
-- protection from some other action, then don't bother displaying anything
-- for the other action (except categories).
if protectionObj.action == 'edit' or
args.demolevel or
not getReachableNodes(
cfg.hierarchy,
protectionObj.level
)[effectiveProtectionLevel('edit', protectionObj.title)]
then
-- Initialise the blurb object
local blurbObj = Blurb.new(protectionObj, args, cfg)
-- Render the banner
if protectionObj:isProtected() then
ret[#ret + 1] = tostring(
(yesno(args.small) and Padlock or Banner)
.new(protectionObj, blurbObj, cfg)
)
end
end
-- Render the categories
if yesno(args.category) ~= false then
ret[#ret + 1] = protectionObj:makeCategoryLinks()
end
return table.concat(ret)
end
function p.main(frame, cfg)
cfg = cfg or require(CONFIG_MODULE)
-- Find default args, if any.
local parent = frame.getParent and frame:getParent()
local defaultArgs = parent and cfg.wrappers[parent:getTitle():gsub('/sandbox$', '')]
-- Find user args, and use the parent frame if we are being called from a
-- wrapper template.
getArgs = getArgs or require('Module:Arguments').getArgs
local userArgs = getArgs(frame, {
parentOnly = defaultArgs,
frameOnly = not defaultArgs
})
-- Build the args table. User-specified args overwrite default args.
local args = {}
for k, v in pairs(defaultArgs or {}) do
args[k] = v
end
for k, v in pairs(userArgs) do
args[k] = v
end
return p._main(args, cfg)
end
return p